Satven Hiring For Autosar Developer

Satven Hiring for Autosar Requiremnets.

1. Functional Safety Engineer
Qualification: BE/ME (Electronics/ Mechatronics /Automotive)
Job Description:

• ECU = Steering (Advantage)
• System level Functional Safety engineer also fine.
• Should be able to read Embedded C code.
• Very good understanding on ISO26262 standard.
• ASPICE knowledge.
• Broad experience in the field of embedded software development (process, requirements, architecture, design, testing) - i.e Some exp in SW development.
• Good exp in Software/System level safety analysis such as FMEA, FTA and DFA.
• Tools: IQRM/Medini, DOORS, Rhapsody/Enterprise Architect EA, Any Configuration tools like PTC Integrity.

2. Autosar Comstack
Location: Hyderabad
Experience: 6-8 Years (Relevant into comsatck exp 6 Years)
Qualification: BE/ME (Electronics/ Mechatronics /Automotive)
Job Description:

• Design, Develop and integrate AUTOSAR software components for automotive ECUs
• Application Software (ASW) components based on AUTOSAR templates and interfaces.
• Developing ASW Software by using Embedded C.
• Knowledge on protocols like UDS services (ISO14229), CAN, CANFD & Flexray.
• Hands-on experience on AUTOSAR BSW Configurations (COM, DCM, DEM & NvM) and Application development. Have good exposure on AUTOSAR architecture.
• Basic Software (BSW) modules such as communication stacks (CAN, LIN, Flexray, Ethernet), Diagnostic services (UDS, DCM) and Fault Management (DEM)
• Eagerness to take over new responsibilities.
• Configure and generate AUTOSAR software architectures using AUTOSAR configuration tools (e.g., Vector Davinci, EB Tresos)
• Experience on SW debugging and hands on Debugger tools (TRACE-32, UDE, Isystem).
• Experience in the following areas: UML (Rhapsody) static analysis tools (such as QAC, Polyspace, UT (Vector cast)), MISRA and generally accepted embedded coding practices.

3. Autosar Diagnostic Stack
Location: Hyderabad
Experience: 5-8 Years (Relevant into Diagnostick Stack exp 5 Years)
Qualification: BE/ME (Electronics/ Mechatronics /Automotive)
Job Description:

Design, Develop and integrate AUTOSAR software components for automotive ECUs
Basic Software (BSW) modules such as communication stacks (CAN, LIN, Flexray, Ethernet), Diagnostic services (UDS, DCM) and Fault Management (DEM)
Application Software (ASW) components based on AUTOSAR templates and interfaces.
Developing ASW Software by using Embedded C
Configure and generate AUTOSAR software architectures using AUTOSAR configuration tools (e.g., Vector Davinci, EB Tresos)
4. Lead System Engineer

• Experience : 07-12 Years
• Qualification : BE /ME Embedded / Mechatronics/ Electronics
• Job Location : Hyderabad

Job Description
Requirements

• Experience in multi-domains (i.e. software, electronics, electric motors, controls, sensors).
• Experience in functional design of complex systems
• Experience in project management
• Hands-on experience in requirements management as well as the associated tool (IBM Rational DOORS)
• Ability to work with both global and virtual teams
• Ability to build critical skills and develop key talent
• Excellent communication skills
• Fluent spoken and written English (overseas experience is a plus)
• Experience in SysML (familiar with Rhapsody is a plus)
• Experience with lifecycle management tools (PTC Integrity) is a plus
• Experience in automotive industry is a plus
• Background on EPS system design is a plus
• Familiarity with ASPICE process is a plus

5. Autosar SW Integartor
Location: Hyderabad
Experience: 5-7 Years
Qualification: BE/ME (Electronics/ Mechatronics /Automotive)
Job Description:
1. Need AUTOSAR knowledge of the different ports, interfaces, and configurations.
2. Need Hands-on with OS Runnable configuration and NVM updates.
3. Need Hands-on with RTE configuration and source generation.
4. Hands-on with Davinci Configurator or equivalent
5. Strong understanding of Compilation and linking processes. Debug skills to identify the route cause in case of build failure.
6. Strong knowledge of version control systems (i.e., PTC integrity)
7. Good hands-on with the build process (build configurations for Pre/Post-build steps and build setup to a new project)
8. Good Scripting (Batch/Python) knowledge to automate and debug the existing tools.
9. Knowledge to analyze map files and Hex files. Required to find the anomalies in RAM/ROM usage.
10. Good to have integration test bench preparation. To perform basic tests before final delivery and support the development teams to identify the cause of failure during CI.
6. Autosar OS Engineer& Developer

• Experience: 10-15 Years
• Qualification: BE /ME Embedded / Mechatronics/ Electronics
• Job Location: Hyderabad

Required Skills & Qualifications:

• Bachelor's or Master's degree in Computer Science, Electrical Engineering, or a related field.
• Over 10 years of experience in embedded system development, with a strong focus on embedded operating systems.
• Extensive experience with RTOS platforms such as custom-built OS solutions.
• Proficiency in low-level programming languages, including C/C++, and assembly.
• Experience with Infineon/ NXP microcontroller architectures, peripherals, and hardware-software interfaces.
• Experience in writing and optimizing device drivers and system-level software.
• Expertise in debugging tools (e.g., JTAG, oscilloscopes) and embedded software debugging techniques.
• Solid understanding of memory management, task scheduling, and synchronization mechanisms in embedded OS environments.
• Experience with version control systems (e.g., Git) and software development methodologies (Agile, Scrum).
• Familiarity with network protocols (TCP/IP, UART, SPI, I2C) and interfacing with external hardware devices.
• Excellent problem-solving skills and attention to detail.
• Familiar in safety-critical applications and compliance with standards (e.g., ISO 26262, IEC 61508).
• Familiarity with continuous integration and automated testing tools.
• Strong communication and collaboration skills to work across cross-functional teams.

7. Autosar MCAL Developer
Location: Hyderabad
Experience: 5-7 Years (Relevant into 5+ Years)
Qualification: BE/ME (Electronics/ Mechatronics /Automotive)
Job Description:
Required Skills & Qualifications:
Bachelor's or Master's degree in Computer Science, Electrical Engineering, or a related field.
5+ years of experience in embedded system development(Software and Hardware integration).
¢ Proficiency in low-level programming languages, including C/C++, and assembly.
¢ Good at Mcal Driver (ADC, SPI, I2C etc..) Development and integration.
¢ Experience with Infineon/ NXP microcontroller architectures, peripherals, and hardware-software interfaces.
¢ Experience in writing and optimizing device drivers and system-level software.
¢ Expertise in debugging tools (e.g., Lauterbach, JTAG, oscilloscopes) and embedded software debugging techniques.
¢ Experience with version control systems (e.g., Git) and software development methodologies (Agile, Scrum).
¢ Excellent problem-solving skills and attention to detail.
¢ Familiar in safety-critical applications and compliance with standards (e.g., ISO 26262, IEC 61508).
¢ Familiarity with continuous integration and automated testing tools.
¢ Strong communication and collaboration skills to work across cross-functional teams.

8 Software Architecture Engineer:
Location: Hyderabad
Experience: 4-10 Years
Qualification: BE/B. Tech/ME/M. Tech (Electronics/ Mechatronics/Automotive)
Job Description:
• Working experience on Software Architecture and Rhapsody model design
• Working experience on RTE
• Working experience on Multicore and OS
• System Knowledge on Steering (EPS) or Braking products and features.
• Working experience on Diag/Comms/Memory stack.
• Experience on V Model and Agile way of working.
9. Software Requirement Engineer
Location: Hyderabad
Experience: 6-10 Years
Qualification: BE/ME (Electronics/ Mechatronics /Automotive)
Position Requirements:

• Define software requirements for embedded software applications. Participate in software development processes such as requirements capture, analysis, linking software requirements to system requirements and architecture, customer specifications
• Software requirements development, flow-down and management, traceability using DOORS or equivalent requirements capture tool(s)
• Work within ASPICE process objectives, achievement of ASPICE levels and supporting audits

Essential Skills and Experience:

• Software requirements management using DOORS
• Previous experience writing software requirements (SWE.1) requirements using DOORS. Includes requirements analysis from systems requirements or customer requirement documents
• Linking software requirements to the parent requirements
• Methodical approach to capturing requirements
• Intermediate to advanced knowledge/experience with DOORS
• 6-10 years of previous post-graduate experience in embedded software engineering (within Automotive industry desirable).
• understanding of C-language. Skills and debugging experience in real-time, embedded systems (preferably automotive).
• Knowledge of automotive CAN bus utilization, related interfaces, etc
• Knowledge of UDS diagnostics for automotive ECUs
• Good practical knowledge of embedded software development methods and tools
• Experience in AUTOSAR based systems are preferable
• Knowledge and experience in IBM Gateway tool highly desirable
• Knowledge and ability to perform traceability and working knowledge with traceability metrics are highly desirable
• Understanding of ASPICE and ISO26262. Previous experience in formal ASPICE audits is very desirable and a plus. Safety analysis knowledge such as HARA, ASIL decomposition are a plus

10. Embedded Cyber Security Developer:
Location: Hyderabad
Experience: 4-7 Years (3-5 Yrs relevant into Cybersecurity Exp Mandatory)
Qualification: BE/ME (Electronics/ Mechatronics /Automotive)
Job Description:

1. Experience in automotive domain.
2. Strong knowledge and skills on Cybersecurity software features development phases like Requirement Analysis, creating Proposals, Planning, deliverables execution, etc.
3. Development experience in Autosar Crypto stack / Boot loader (with HSM knowledge), Cybersecurity Applications.
4. Good experience in HSM (vHSM / Escrypt HSM) configuration, integration and debugging.
5. Strong debugging skills in HW environment with T32/iSystem/UDE debuggers.
6. Good experience in autosar configuration tools like Vector Davinci Configurator.
7. Good experience in analysing customer requirements and s/w requirements.
8. Experience in CAN(FD)/Flexray/Ethernet protocols.
9. Knowledge on Infineon Tricore MCUs.

Required Tools:

1. Version and configuration management tools (Integrity, GIT, clearecase, Mks etc.)
2. Autosar configuration tools: Davinci config pro, Davinci Dev, EB Tresos
3. Debuggers: Trace 32 / ISystem / UDE
4. Bench testing: Controller, Debuggers, Canoe, Canape,Canalyzer.
5. Static analysis: QAC, Polyspace.
6. Requirements & Architecture tools like DOORs, and Rhapsody.,

Interested candidates please share our resume to this email id sivaleela_tummaluru@satven.com